3 Digit Digital Stream TV Converter Box Remote Codes
4 Digit Digital Stream TV Converter Box Remote Codes
5 Digit Digital Stream TV Converter Box Remote Codes
Programming and Trouble shooting Digital Stream TV Converter Box
How do I search for the programming codes using the remote that came with the Digital Stream converter box?
1 – Make sure the TV is turned on.
2 – Press and hold the TV power button.
NOTE: The TV power button will need to be pressed and held the complete time you are programming the remote.
When the TV power button is released then programming ends.
3 – Press the Up Arrow repeatedly until the TV turns off.
Allow 1 second between presses for the remote to send the code and for the TV to respond.
After 105 Up Arrow presses, the remote control has ran through the complete list of TV codes.
To try again, use the same method, but press the Down Arrow to scan through the TV codes in the other direction.
4 – When the TV turns off, turn it back on using the remote.
5 – Check that all of the TV buttons work.
NOTE: If any of the TV buttons do not work keep searching for a remote code from step 1.
To reset the remote, clear the memory by removing the batteries and pressing some buttons on the remote. Then replace the batteries.