| Universal Logitech Harmony 650 Programmable Infrared All in One Remote Control codes|
Logitech Harmony 650 Infrared All in One Remote Control, Universal Remote Logitech, Programmable Remote Codes
Here is the method for the step by step way to configure your Logitech Universal Remote
You can add codes to your Logitech remote with the remote control application from Logitech. You need to first download the software from the Logitech website. These codes are generated in collaboration between Beyond Platinum and Logitech. Go to the website My Harmony and set up your remote using the database. Harmony support page is here and the Harmony database compatibility page is here.
Steps to get components working on your Harmony remote
With the Logitech remote control app that is connected to the internet:
(Below is an example of how the setup procedure works)
1. Select “ADD DEVICE”
2. Under “DEVICES” select “SATELLITE”
3. Under “MANUFACTURER” select “BEYOND PLATINUM”
4. Under “MODEL” type the words “Explora MODE1” or “Explora MODE2” (DO NOT type the inverted commas but be sure to type the words Explora MODE1 or Explora MODE2 exactly as shown)
5. Test to be sure your remote is now working
Download Logitech Remote 650 Manual
| Remote Control Codes For COBY TVs|
OBY TV Remote Control Codes
5 digit remote codes for COBY TV = 11538, 12017, 11531, 12003, 11314, 11265, 01376, 10178
4 digit remote codes for COBY TV = 1538, 2017
ON MOST REMOTES:
1. Turn on the TV.
2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3. With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
4. Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5. Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.
Your COBY TV can be controlled with a universal remote and work with Comcast, Dish Network, Direct TV, RCA, etc…
| Remote Control Codes For Avera TVs|
Comcast: Use remote code 10030
AT&T (U-verse): Use remote code 1043
DirecTV: Use remote code 10030
RCA Universal remotes: Use remote code 0030
Dish Network Remote Controls: Use remote code 506Please use the above codes to program the remote control.
How to Program Avera TV Remote
- Switch on the TV
- Now go to the Component key on your remote which is usually located at the top of the remote.
- Press TV.
- Now it will ask to enter Avera TV remote codes. Enter the appropriate one from above list.
- Now its done. Please switch off using the remote and test all functions.
| Remote Control Codes For Element TVs|
Newer codes 5 digit:
Cox Universal remote codes for Element TV
1687, 1886, 2183
Verizon universal remote codes for Element TV
Comcast Xfinity remote codes for Element TV
13559, 11687, 12964, 12260, 13907,
11886, 11864, 12183, and 10178
Element TV Codes for RCA 3 in 1 Universal Remote
11687, 11886, 12183, 12964, 13559
Older codes 3 digit Codes to operate your Element TV:
046, 005, 028, 043,
048, 076, 096, 155,
004, 051, 127, 151,
153, 154, 231, 236,
238, 247, 252, 168,
How to Program Universal remote control for Element TV
Before you begin programming universal remote control to control the Element TV make sure to plug all device. Check the battries in the universal remote are working. with out wasting any more time lets get to working.
Using the code(s) provided above, program the remote control directly using the following steps.
Enter Setup Mode
Press and hold down the SETUP button on the remote until the red light on the remote turns on. Release the SETUP button. The red light will remain on.
NOTE: The red light with either be a small light at the top of the remote or the power on/off button.
Press the device type button
Press and release the device button on the remote for the type of device you wish to control. The red light will blink once and remain on.
NOTE: If there is not a device button on the remote for your type of device, you can use any device button on the remote.
Enter the device code
Use the number buttons on the remote to enter the codes shown above. The red light will turn off after entering the fourth digit.
Tests the results
Point the remote at the device. Test the buttons on the remote to see if the device responds as you would expect. If the buttons do not operate the device, return to Step 1 above and use the next code in the list.
Repeat this process for your other devices
Your Element TV can be controlled with a universal remote and work with RCA remotes, Comcast, DirecTV, Charter, and more.
| Magnavox Universal Remote Codes for TV|
Complete list of codes for Magnavox Universal Remote Codes for TVs, DVD and audio video devices along with programming instruction to control all your devices.Magnavox Universal Remote Control Programming Codes are used to program your Magnavox remote or any universal remote to conrol your Television and audio video devices.
How to program Remote Control Codes For Magnavox TVs using most universal remote controls
Turn on the TV, Make sure battries are working in the remote.
Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code,choose corresponding code from the list give below.
Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.
Remote Control Codes For Magnavox TVs
view full universal remote code list for Magnavox universal remote
Magnavox TV Remote Control Codes
Magnavox Sound Bar
Magnavox DVD Remote Codes
Magnavox HDTV Remote Codes
Magnavox VCR Remote Codes
Complete list of codes for Magnavox Universal Remote Codes
Magnavox Universal Remote Codes
Magnavox Universal Remote Codes
| ||0090|| ||0048|
|MAGNAVOX and||0000,0001,0002,0003,0004|| ||0057|
|SYLVANIA||0018,0020,0023,0034,0041|| || |
| ||0048,0051,0057,0067,0072|| || |
| ||0078,0079,0080,0081|| || |
you can find the additional support information at Magnavox website.
| Remote Control Codes For SEIKI TVs|
DIRECTV = 10178 11687, 10178, 10835, 10056, 10150, 10463, 10156, 11498, 11401, 0178,
Comcast = 11864, 10178, 0060
Cox Communications = 0178
Atlas DVR Device URC = 0178
Time Warner Cable = 0178
Philips = 0002
Bell Remotes & Dish Network = 505, 506, 516, 523, 526, 566, 573, 612, 627, 647
ATT U-verse = 1004
Hitachi = 0002
URC = 2964, 0145
Cablevision customer (optimum) = 004
Bose or universal remotes = LG remote code
Universal Remote = One For All OARC04G 4 Device Universal Remote (Element code)
| Remote Codes for TCL Roku TV|
Universal Remote Codes for TCL Roku TV
TCL TVs have become increasingly popular due to their affordability and advanced features. Programming a universal remote for a TCL TV is a simple process that allows you to control your TV with ease. There are two different methods for programming a universal remote, depending on the brand and model of your remote control. By following following basic steps and using the universal remote codes listed below, you can easily program your remote to work with your TCL TV.
ATT Uverse = 1346
Bright House Cable = 1756
Cablevision = 031
Charter = 11756
Comcast = 11756
Cox = 1756
DirecTV = 11756
Dish Network = 535
ONN = 3851
RCA = 11756
Time Warner = 387 or 1566
TIVO = 0091 or 0366
Verizon = 180
Here are some additional TLC TV codes -
If you own a Roku TCL Smart TV and a cable or satellite remote control, you can program the remote to work with your TV. This can be a convenient way to control your TCL Smart TV without having to use the multiple remotes. The process for programming the universal remote may vary depending on the specific remote control you have, but there are general steps you can follow to get started. By doing so, you can enjoy your favorite shows and movies with greater ease and convenience.
Controlling your TCL Roku TV with a cable, satellite, or universal remote is possible in many cases. Your provider may have a table of codes that you can use to program your remote to control certain functions of your TV. Look for your provider and the code that matches your remote in below list, and follow the instructions provided to program your remote. It's important to note that these codes come from TV remote cable providers and we carefully collect from companies to provide you. Not all buttons on your TCL Roku TV remote can be programmed to the buttons on your cable or satellite remote, and the level of button support may vary for specific remotes.
Roku TCL TV Programming instructions
The process for programming a remote control for a TCL TV may vary depending on the model of your remote control. However, here are some general steps that you can follow:
- Turn on your TCL TV.
- Press and hold the "Setup" button on your remote until the button blinks twice.
- Enter the four-digit code for TCL TVs. You can find a list of codes above.
- Press the "Power" button on the remote. If the TV turns off, the programming is successful.
- If the TV does not turn off, repeat steps 2-4 with another code until you find the correct one
If none of the codes work, you can try the auto-code search method:
- Turn on your TCL TV.
- Press and hold the "Setup" button on your remote until the button blinks twice.
- Press the "TV" button on your remote.
- Press and hold the "Setup" button again until the TV button blinks twice.
- Press the "Power" button on the remote and then press "CH+" repeatedly until the TV turns off.
- Press the "Setup" button again to save the code.
| Simple Steps to Program Your Xfinity Remote|
How to Pair and Program Your Xfinity Voice Remote
Find Manufacturer’s setup code here : 3 digit code, 4 digit code, 5 digit code for your TV then follow the instructions listed below
Simple Steps to Program Your Xfinity Remote
Step 1 : Turn on your TV and set-top box.
Step 2 : Press the Setup button on your remote until the LED at the top of the remote changes from red to green.
Step 3 : Enter the universal remote code from the TV codes lookup tool using the number buttons on the remote.
Step 4 : The LED should flash green twice when the code is entered.
Step 5 : Press the TV Power button on the remote.
Step 6 : If the TV turns off, you have successfully programmed your remote to control your TV.
How To Program X1 Remote Control to Your TV and Audio Device
If you can’t find the code that works for your TV after following the steps above:
Step 1 : Press and hold the Setup button on the remote until the LED at the top of the remote changes from red to green.
Step 2 : Press 9-9-1 on the remote. The LED should flash green twice.
Step 3 : Press the CH ^ button multiple times until the TV turns off.
Step 4 : After the TV turns off, press Setup.
Step 5 : Press the TV Power button on the remote. If the TV turns on, you have successfully programmed your remote to control your TV.
| Vizio Soundbar Remote Control Codes|
Vizio Sound Bar 4 Digit Remote Control Codes:
Vizio Sound Bar 5 Digit Remote Control Codes:
Some sound bars can be programmed to accept other IR to control them. Apply the TV volume IR into the Vizio SB.
All codes reported working with the Vizio Soundbar VSB200, SB3820, VSB201, VHT215, S3821.
These codes have been tested with the Comcast remote controls, Verizon Fios, Xfinity X5 remote, Uverse, U-Verse, S10-S3, S10-S4, Atlas 1056B03, etc.
If you use Verizon Fios, there is a Key Fix.
If your remote control is programmed for your TV, but the VOL, Mute, or the A/V keys do not work correctly, then you can try using the Key Fix feature to fix the buttons. Here is how to:
1 – Press and hold the OK and * buttons at same time. The Red LED will blink twice and then stay illuminated.
2 – Press and hold the key that does not work properly. The remote control will auto try a new code every 1 sec.
3 – When the TV responds correctly then release the key.
4 – Then press OK to save the current setting.
Some remote codes may not work with certain configurations such as cable TV remote model or sat TV remote. If this is the case, you can program an unsupported device (such as a sound bar) by setting each key individually to send a code. This means each button or key on your remote will need to be programmed for the remote to work. Each remote function works by sending a code to sound bar. This is done by setting AUX to a main device code and then setting things like volume up and down individually.
An example would be…
The code 00169 will make the volume go up.
The code 00168 will make the volume go down.
The code 00037 will toggle the mute.
The code 00165 will turn the power on and off.
If you use Comcast, here is a way to make the remote work with the SB.
1 – Check to see if the signals work by assigning 20752 to the AUX button.
2 – Vol DOWN should make the volume go down, and the right arrow should make it go up.
3 – If the signals work then you can permanently assign the EFC 00169 to Vol UP and 00168 to Vol DOWN by using the 994 Command.
Here is a Vizio sound bar and Uverse remote control fix…
1 – Program the Vizio sound bar to “TV” key on the Uverse remote using code 1009.
2 – Program your TV to the “DVD” key on remote using manual code or auto scan mode.
3 – Send volume to TV button, press ATT then press OK, then enter 955, then press TV button.
4 – If you want to power all off at once, press ATT and OK buttons, release, enter 977, press ATT again, then press DVD and TV buttons, then the ENTER button. When you press volume the sound bar will operate, then when you press power everything should power off or on.
| LG Soundbar Remote Control Codes|
If you have an LG Sound Bar and want to control it with a Universal remote control, Cable remote, or SAT remote, we have the codes needed. An LG soundbar can be controlled with just about any universal remote control if you have the correct programming guide and the correct remote codes for the sound bar. If the codes below do not work with your LG sound bar, please leave a comment below with the complete model number of your remote control and model number of your LG soundbar and we will find you the correct remote code.
LG Soundbar 4 Digit Remote Control Codes:
LG Soundbar 5 Digit Remote Control Codes:
NOTE: Some soundbars can be programmed to accept other IR commands to control them.
Apply the TV volume IR into the LG Soundbar. OR… Use AUX mode on your CABLE/SAT remote to control the sound bar as the newer remotes will accept the codes under the AUX mode.
Use the 993 code to make the AUX Volume mode control the LG sound bar.
Unlock the volume with the 993 code and the Comcast remote will then control the volume via the soundbar and not the TV.
LG SOUNDBAR remote control codes – All Models
LG SOUNDBAR MODEL NUMBERS:
All codes reported working with LG Soundbar models: NB2022A, NB4530, LSB316 Soundbar, NB3510A, NB3532A, NB3520A, NB3530A, NB2540, NBN36 280 watt, LG 300W, LAS454B, LSB 316 Sound Bar with wireless Subwoofer, etc.
WORKING WITH THESE REMOTE CONTROLS:
These remote codes have been tested with the following remote controls: Comcast remotes, Xfinity X1 remote, Xfinity XR2 remote, Xfinity XR5 remote, DirecTV RC7X, DirecTV RC73 remote, Time Warner Cable UR5U-878OL, Direct TV remote RC65RX, U-verse remote, U-verse remote S10-S4, AT&T remote, etc.
The silver remote with the RED OK button will work with the remote codes above – The gray remote with the RED OK button is considered legacy equipment, therefore there are no new remotes with updated codes.
USING DIRECTV AND REMOTE CODES DO NOT WORK?
Perform a code search by volume – with soundbar on – volume up – but muted…
1 – Use AV1 or AV2.
2 – Press and keep holding MUTE and SELECT.
3 – It will blink 2 times then release.
4 – Enter 9 9 1 on the remote.
5 – Enter 3 on your remote.
6 – Press and then release SELECT or VOL UP (test to see which exact button on your remote works).
7 – Point your remote control at the soundbar and keep pressing and releasing CHANNEL UP.
8 – Once the volume changes you need to press SELECT to lock in the code.
(If the DirecTV remote does not turn the soundbar ON or OFF, use the middle PWR key in the AV1 or AV2 device as this will control a Soundbar.)