3 digit remote codes for old GE Universal remotes for Cable box

Old Ge Universal remote controls that use 3 digit codes can be programmed to be used with many devices like TV, Blu-Ray and AV Receivers, you can ditch several different remote controls  for one Ge Universal remote. Ge remote can control all home theater devices and components. Ge Universal remote allows you to set aside the individula device remotes for one Ge remote. With Ge universal remote you can start using it by first programming the remote with each individual device in the home theater arsenal. 

Before you begin, make sure you have hooked up all the cables and powered on the devices and componets. then, make sure battries are working in the remote.

3 digit GE Universal Remote Codes manual setup and Instructions

Make sure to hookup and power on all the devices you want to setup. next make sure the batteries are working in the GE universal remotes. Note down the GE universal remote codes from the list provided. Nothing is more frustrating to find out that you have not hooked up or universal remote batteries are bad after spending your evening on programming GE remote. 

Step 1. Enter device into setup mode

Locate SETUP button on the GE universal remote control, Press and hold the setup button till you see red light is on. then stop holding the setup button. now remote is in setup mode.

Step 2. Select the device 

quickly press and release the device button you want to setup. For example if your programming TV then press TV button and release it.

Step 3. key the universal remote 3 digit code coresponding to your device from below list.

Use the number keypad to enter universal remote code, Now red light will trun off.

Step 4. Verifying the results.

point GE Universal remote in the direction of the device and try to trun on and off the device. if the device responds your all set.  otherwise repeat the steps using next four digit code from below list.

Step 5. Setting up other device.

repeat the above steps to setup more devices.

 

3 digit remote codes for old GE Universal remotes to program Cable box

 

BrandCode
ABC001, 002, 003, 004, 005, 006, 007
Antronix008, 009
Archer008, 009, 010, 011
Cabletenna008
Cableview008
Century011
Citizen011
Colour Voice012, 013
Comtronics014, 015
Contec016
Eastern017
Garrard011
GC Electronics009
Gemini018, 019, 049
General Instrument003
Hamlin020, 021, 022, 035, 045
Hitachi003
Hytex002
Instant Replay021
Jasco011
Jerrold001, 003, 005, 007, 018, 023, 024, 046
Magnavox025
Memorex026
Movie Time002, 027
NSC002, 027
Oak002, 016, 029
Panasonic000, 048
Paragon026
Philips011, 012, 013, 019, 025, 030, 031, 032
Pioneer033, 034
Pulsar026
RCA000, 047, 049
Realistic009, 049
Regal022, 035,
Regency017
Rembrandt003
Runco026
Samsung014, 034
Scientific Atlanta006, 036, 037, 038
Signal014, 018
Signature003
Sl Marx014
Sprucer000
Starcom001, 007, 018
Stargate014, 018
Starquest018
Tandy040
Toshiba026
Tusa018
TV86027
Unika008, 009, 011
United Artists002
United Cable001
Universal008, 009, 010, 011
Videoway044
Viewstar015, 025, 027, 040
Zenith026, 050, 051