Use the following directions to program your VIZIO Universal Remote Control to use with your DIRECT TV Satellite (including Set-top Box, WebTV and DTV) (use code (A)(B) etc. if you have 2 or more of the same device) device.
1. Manually turn on your TV (or device you want to control)
2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.
3. Enter one of the programming code from the list 1049 1766 1767 1768 0622 0632 0629 0623 0576 0586 0616 0613 0630 0634 0636 0638 0641 0652 0653 0657 0659 0607 0619 0537 0538 0539 for your DIRECT TV Satellite (including Set-top Box, WebTV and DTV) (use code (A)(B) etc. if you have 2 or more of the same device) device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off.
4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.
Brand: DIRECT TV.
Device Type: Satellite (including Set-top Box, WebTV and DTV) (use code (A)(B) etc. if you have 2 or more of the same device) .
Remote Code List:1049 1766 1767 1768 0622 0632 0629 0623 0576 0586 0616 0613 0630 0634 0636 0638 0641 0652 0653 0657 0659 0607 0619 0537 0538 0539