Program Keyless Entry Remote Key Fob 1996 Honda Passport

The keyless entry system in 1996 Honda Passport is a manufacturer key-less entry system. If you have to replace a lost or damaged key-fob remote, you can reprogram the honda passport car. Program Keyless Entry Remote Key Fob 1996 Honda Passport using the below steps.

Step 1.

Located the keyless entry main module which is located on the driver's side seat.

Step 2.

Switch the ignition to the ON position (the position just before starting the car - do not start the car)

Step 3.

Using a paper clip PRESS and HOLD the green programming button on the side of the keyless

entry main module. Wait for the lights to flash and RELEASE.

Step 4.

Holding the remote so the key chain is facing the ground press the top button once. The light will turn off and you will hear a chirp from the vehicle confirming the remote was successfully programmed.

Step 5.

If you have any other remotes you would like to program repeat steps 3 & 4 if not proceed to step 6.

Step 6.

Switch the ignition to the OFF position. Programming is now complete.