Here’s how to program your remote for control of a TV or TV and AVR with Comcast Xfinity Remote XR2

Here’s how to program your remote for control of a TV or TV and AVR

1.Install the remote control batteries and make sure your TV, AVR and set-top box or DTA are powered on.

2. Refer to the “Setup Codes for TVs” and “Setup Codes for AVRs and Soundbars” sections on the back of this guide to find the manufacturers of your TV and AVR.

3. Press and hold the Setup button on your remote until the status LED changes from red to green.

4. Enter the first code listed for the TV manufacturer. The status LED should flash green twice when the code is entered.

5. Press the TV Power button on the remote. If the TV turns off, you have successfully programmed your remote. Turn the TV back on and press the VOL +/- and Mute buttons to confirm they control the volume of your device.

6. If the TV does not turn off or the VOL +/- and Mute buttons do not work, repeat the steps above using the next code listed for your TV manufacturer.

If you only want to program your remote for TV

Comcast XFINITY Remote to control codes for TVs - XR2 Remote Model

control, you’re all set!

Steps to program your remote for AVR (Home Theater/) control.

7. Press and hold the Setup button on your remote until the status LED changes from red to green.

8. Enter the first code listed for the AVR manufacturer.The status LED should flash green twice when the code is entered.

9. Press the All Power button on the remote. If the AVR turns off, you have successfully programmed your remote. Turn the AVR back on and press the VOL +/- and Mute buttons to confirm they control the volume of your device. If so, you’re all set!

10.If the AVR does not turn off or the VOL +/- and Mute buttons do not work, repeat the steps above using the next code listed for your AVR manufacturer.

Here’s how to program your remote for only AVR control:

1. Install the remote control batteries and make sure your AVR and set-top box or DTA are powered on.

2. Find the manufacturer of your AVR on the back of this guide. 3. Press and hold the Setup button on your remote until the status LED changes from red to green.

4. Enter the first code listed for the AVR manufacturer. The status LED should flash green twice when the code is entered.

5. Press the TV Power button on the remote. If the AVR turns off, you have successfully programmed your remote. Turn the AVR back on and press the VOL +/- and Mute buttons to confirm they control the volume of your device. If so, you’re all set!

6. If the AVR does not turn off or the VOL +/- and Mute buttons do not work, repeat the steps above using next code listed for the device manufacturer. You may need to try several codes to find the one that works for your device.