Charter Spectrum Remote Control Codes

How to Program Charter Spectrum Remote Control

The Charter Spectrum Remote Control is pre-programmed to operate Spectrum receiver, an RCA TV, a Toshiba DVD player, and a Pioneer audio receiver. To control devices other than the default brands, perform the following steps:

Make sure to hookup and power on all device you want to setup using Charter Spectrum universal remote codes. next, make sure the batteries are working in the Charter Spectrum universal remote. Note down the universal remote codes from the Charter Spectrum remote code list provided. Nothing is more frustrating to find out that you have not hooked up or universal remote batteries are bad after spending your evening on trying to program Charter Spectrum universal remote. 

Programming Charter Spectrum Universal Remote Control

Step 1

Turn on a device and, if applicable, insert DVD or blu-ray disk.

Read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2.

Step2

On the remote control, press a device key once (e.g. AUX, DVD, TV, CBL or STB); it will blink once. Then press and hold SETUP until the selected mode key blinks twice.

Step 3

Use the below listed universal remote codes to locate the type of device and brand name and then enter the first five-digit code for your device. If performed correctly, the selected mode key will blink twice.

If the selected mode key emits a long blink, the entry is invalid. Repeat steps 2 through 3 and try entering the same code again.

Step 4

point the Spectrum Remote Control towards the device and press PWR once. The device should turn off. If it doesn't, repeat steps 2 through 3, trying each code for your brand until you find one that works. If it still doesn't respond, try searching for the code.

If the device doesn't have a PWR key, press the PLAY key.

Step 5

Repeat steps 1 through 4 for each device you want the remote control to operate. For future reference, write down each working device code.

Charter Spectrum Remote Control for TV

LG: 11423, 10017, 11265, 10178, 10700, 10856, 11178, 11768, 11993, 12358, 12424

Samsung: 10812, 10060, 10702, 10178, 10650, 10766, 10814, 11060, 11903, 12051

Sharp: 10818, 10093, 10688, 10851, 11602, 12360

Sony: 10000, 10810, 10834, 11317, 11685

Toshiba: 11524, 10156, 11265, 10060, 10650, 10822, 10832, 10845, 11156, 11356, 11656, 11704, 11935, 11945, 12006

Vizio: 11758, 10864, 10885, 11756

Charter Spectrum Remote Control for DVD Player

Philips: 20503, 20539, 22056, 20646, 20675, 21158, 21267, 21340, 21354, 21506, 22084, 22434

Pioneer: 20525, 20571, 20631, 20142, 20632, 21460, 21512, 21571, 22442

Samsung: 20490, 20573, 20199, 20820, 21044, 21075, 21470, 22069, 22369, 22489, 22556

Sony: 20533, 20864, 21033, 21070, 21431, 21516, 21536, 21633

Toshiba: 20503, 20695, 21154, 21503, 21510, 21515, 21588, 21606, 21608, 21769, 22006, 22277

Charter Spectrum Remote Control for Blu-ray Player

Denon: 20634, 22258, 20490

Panasonic: 20490, 21641, 21579, 21762, 20703, 21490, 20632, 20503

Samsung: 12051, 10812, 10702, 10060, 20199, 31868, 10766, 20573, 11903, 22069, 11060, 21075, 20240, 31295, 31500, 22329, 22369, 21470, 22489, 01877, 21044, 20820, 10650, 10814, 22556, 10178, 20490, 20045, 01982, 31304, 20744

Sony: 10000, 10810, 21633, 20032, 31058, 31622, 32172, 31759, 20033, 21516, 31822, 20533, 11317, 31441, 21032, 31758, 32522, 10834, 21033, 31258, 20864, 31382, 31131, 31658, 21070, 11300, 31406, 31503, 20636, 31858, 32216, 21536, 11685, 21431, 31558, 30797, 32320, 21972, 20000, 20035

Yamaha: 30176, 32061, 31276, 30376, 20497, 20539, 32467, 31815, 31331, 31476, 20545, 31376, 32116, 31176, 22298, 20490, 32455, 22558, 32458, 32471, 20817, 31375, 32021, 20646, 21354, 10797, 10833, 20038, 10769, 20041, 21416

 

Charter Spectrum Remote Control for Set-top box

Cisco: 01877, 01982

Motorola/Arris: 01376, 00476, 00810, 00276, 01187, 01254

Pace: 01877, 00237, 00008

Scientific Atlanta: 01877

Charter Spectrum Remote Control in pdf format