Yamaha RAV334 Remote Instruction Manuals and Codes.

Make
Yamaha
Model
RAV334
Universal remote control codes for Yamaha TV
The Yamaha RAV334 full-function or Universal remote control to operate varios devices and you can program the remote control to operate most of the popular brands of audio/video equipment like a TV, a DVD player (or VCR), or a Network satellite receiver. See Programming for Other Equipment on This remote control may have features not used by your receiver. This guide makes it easy to set up and use your remote control this guide contains in-depth information to help you get the most from your remote control, including controlling other equipment like TVs, VCRs, and DVD players.   If you press power button pointing to the device if it powers off then its already programmed and do not need further programming. If the device is not responding check the batteries in the remote it may be that batteries are exhausted.

YAMAHA BLU-RAY PLAYER 4 DIGIT REMOTE CODES:
2064
2448
2449
2474
2505

More Yamaha Remote Codes for other Audio Video Components:

Yamaha CD Player
5082
5095

Yamaha CD Recorder
5083

Yamaha MD (Mini Disc)
5080
5081
5086

Yamaha Tape
5084
5087

Yamaha Tuner
5066
5085
5088
5090
5092

Yamaha LD (Laser Disc)
2080

Yamaha Amplifier
5019
5020
5098

Program your universal remote control to a Yamaha Sound Bar. Use the following 5 digit remote codes.

Yamaha Sound Bar 5 Digit Remote Control Codes:
31947
31331
30176
31176
30354
10030
10797
10017
10019

All codes reported working with these Yamaha Sound Bar Models: ATS-1030, YSP-1000, YSP-5100, YSP-4100, YSP-1400, YAS-101, YAS-103, YHT-S400, and YSP-4000BL.

These codes have been tested with the…. Comcast remote controls, Xfinity XR5, DVR 3 device remote, XR2 Remote, Xfinity XR2 U2, XR2 R2, DirecTV, Directv HR24 STB, S10-S4, U-verse remote control, RC65, Satellite H20 Receiver, DirecTV Plus HD DVR, Comcast 3-in-1 remote, and 1067BG3.

If using Xfinity try these programming methods:
-Hold Setup (2 button flashes)
-994
-Setup
-00169
-Vol Up (2 button flashes)
(Programs the volume down button to toggle TVOL on the Yamaha sound bar)

OR

-Hold Setup (2 button flashes)
-11144 (2 button flashes)
(Accepted by the Xfinity remote and programs the volume down button to toggle TVOL on the Yamaha sound bar, Should let you turn TVOL ON and OFF)

Help with Xfinity XR2 Remote here.

If using U-verse or DirecTV (ATT) try these programming methods:
-ATT/OK-955-AUX-ENTER
-ATT/OK-977-AUX-TV-ATT-ENTER

OR

Use code 30176 or 31331 for the Yamaha Sound bar
(There has to be a TV code programmed to the TV device or the volume keys will not work)
Then try this:
-AV1 or AV2
-Press and hold MUTE & SELECT, wait for two blinks and release
-Enter 30176
Then…
-AV1 or AV2
-Press and hold MUTE & SELECT, wait for two blinks and release
-Enter 993
-Press SELECT
Then…
-AV1 or AV2
-Press and hold MUTE & SELECT, wait for two blinks and release
-Enter 963
-Press Ch Down
Then teach the Yamaha Sound bar the commands from the DirecTV ATT remote control.

OR

Use code 30176 or 31331 for the Yamaha Sound bar
(There has to be a TV code programmed to the TV device or the volume keys will not work)
-AV1 or AV2
-Press and hold MUTE & SELECT for 2 blinks
-Enter 993
-Press SELECT

  Use the remote control's mode buttons to set the remote to the correct mode for the equipment. Be sure to program the remote control to operate the other equipment as described on manual. To change the mode, press the button for the equipment you want to control. The mode button lights for three seconds to show you've set the remote to that mode.   Depending on how the remote is set up, the remote control may use UHF radio signals, IR signals, or both to control the receiver. However, only IR signals are used to control other equipment. IR signals travel short distances generally 20 feet or 7 meters they can go up to 40 feet, and cannot go through walls or other solid objects. Point the remote control directly at the equipment you want to control, with no objects to block the signal path.   This manual shows you how to program the remote control to operate a TV. The following section uses a different method to program the remote control to operate a TV or other equipment (such as a DVD player or VCR, tuner, amplifier, audio receiver or a second TV). You can program the remote control by either following the instructions in Programming Using Equipment Remote Code Tables, or the Scanning for Equipment Codes procedure.   When programming the remote control to operate combination equipment, such as a TV/DVD or a TV/VCR, program the remote control in one mode, and then repeat the procedure in the other mode. For example, to program the remote control to operate a TV/DVD player using code 765, follow the instructions to program the remote to operate the TV using codes, and then repeat the instructions for the DVD using the same code. Put the remote in TV mode to use TV functions, or DVD mode to use the DVD player (or VCR) functions.